Outdoors
Sponsored by

Zero Turn Machanics

1,681 Views | 19 Replies | Last: 2 days ago by chaca5151
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:19a, 9/16/25
I have a Cub Cadet zero-turn mower that seems to struggle going up hills. It will slow to a crawl. Yesterday, it had no issues. This morning, I adjusted the arms so they would go forward more, giving me a little more speed.

I was heading to my shed and got caught on a rock under the deck. The pto wasn't spinning, but thats when I noticed it slowed down. If I hop off for 30 seconds and get back on, it's normal until I encounter an incline.

It was passed down to me. I've never owned one.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
docb
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:43a, 9/16/25
AG
I would start off by replacing the fuel filter and the air filter. Probably needs it anyways and it just might solve your problem.
Reply Quote
5
Gunny456
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to chaca5151 • 11:44a, 9/16/25
AG
If your engine itself is running properly and you don't have the correct drive power the problem is probably due to your rear wheel drives. There are two hydrostatic drives on your machine. They are part of the transaxle transmission drives that power your rear wheels. They have reservoirs for oil that must be kept at correct levels. You might check those levels first.
Those drives also have filters in them that should be changed as normal maintenance along with draining and changing the fluids in the hydrostatic drives.
If yours has never been serviced it may need that done.
There are proper procedures for changing those filters and oils in the two drives transmissions that you can watch on you tube for your model.
I would change the filters and oil in the two drives….and or check the oil levels and see if that does not fix your problems.
Reply Quote
6
3 edits
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to docb • 12:51p, 9/16/25
docb said:
I would start off by replacing the fuel filter and the air filter. Probably needs it anyways and it just might solve your problem.


Yes just replaced the fuel filter yesturday and the air filter is clean.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Gunny456 • 12:54p, 9/16/25
Gunny456 said:
If your engine itself is running properly and you don't have the correct drive power the problem is probably due to your rear wheel drives. There are two hydrostatic drives on your machine. They are part of the transaxle transmission drives that power your rear wheels. They have reservoirs for oil that must be kept at correct levels. You might check those levels first.
Those drives also have filters in them that should be changed as normal maintenance along with draining and changing the fluids in the hydrostatic drives.
If yours has never been serviced it may need that done.
There are proper procedures for changing those filters and oils in the two drives transmissions that you can watch on you tube for your model.
I would change the filters and oil in the two drives….and or check the oil levels and see if that does not fix your problems.



The engine isn't running properly, and I Im waiting on a tool to remove the carburetor. I'll see how it does once I give it a good cleaning. After that, I will change the oil in the transmission like you said. I added some to the reservoir, but I haven't noticed a drop in the level yet.

They changed the fluids in the spring.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
1
D Nauti
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
5:17p, 9/16/25
I think you would hear the engine bog if it was an engine problem. I would look for a belt or idler issue. Should be 2 belts under the motor, 1 drives what ever drive the wheels, the other one has an electric clutch and drives the deck.
Reply Quote
2
ought1ag
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
6:40a, 9/17/25
AG
old cracking drive belt?
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to D Nauti • 1:08p, 9/17/25
D Nauti said:
I think you would hear the engine bog if it was an engine problem. I would look for a belt or idler issue. Should be 2 belts under the motor, 1 drives what ever drive the wheels, the other one has an electric clutch and drives the deck.


Perhaps I need to investigate this further; the belts seem fine when I tug on them.

When I first get on it, the mower goes without any issues. The moment I hit any incline, it slows. Sometimes, it seems to grab and go a little faster, but it's short-lived.

*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
Gunny456
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to chaca5151 • 5:16p, 9/17/25
AG
The symptoms you are describing are classic hydrostatic drive issues. You said they changed the fluids in the drives? Are you sure they did that and if so did they change the filters that are in each of the drive motors? If they just changed the fluids and did not change the filters at the same time the filters could be clogged. Typically having the hydrostatic drives/hydraulic pump serviced is considered a dealer performed maintenance. However, if you are mechanically inclined it is not that hard a job. You typically half to jack the rear of the machine up and remove the rear wheels to get to the hydrostatic drives.
Reply Quote
ought1ag
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
6:44p, 9/17/25
AG
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Gunny456 • 11:01a, 9/18/25
Gunny456 said:
The symptoms you are describing are classic hydrostatic drive issues. You said they changed the fluids in the drives? Are you sure they did that and if so did they change the filters that are in each of the drive motors? If they just changed the fluids and did not change the filters at the same time the filters could be clogged. Typically having the hydrostatic drives/hydraulic pump serviced is considered a dealer performed maintenance. However, if you are mechanically inclined it is not that hard a job. You typically half to jack the rear of the machine up and remove the rear wheels to get to the hydrostatic drives.


LOL well now you have me second guessing that!
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to ought1ag • 11:07a, 9/18/25
ought1ag said:


Great video! Thank you. I will go ahead and change this out.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
2
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:52a, 9/29/25
Unfortunately, changing the hydraulic fluid didn't work. Waiting on a new carb and coils. See if that will work.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
Gunny456
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to chaca5151 • 10:58a, 9/29/25
AG
Did you change the hydraulic filters? It will do no good to change out the fluid unless you also changed the filters.
Reply Quote
aggieforester05
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:04a, 9/29/25
AG
I'm about halfway done changing the Hydrostatic filters and oil on my Dixie Chopper. If I saw the engineers in person, I'd karate chop them in the throat. I've never worked on any contraption with such grueling routine maintenance tasks. It's like it was a challenge for them to make every fluid and filter as difficult to change as possible.
Reply Quote
5
Gunny456
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to aggieforester05 • 11:13a, 9/29/25
AG
Yes sir. I've done the same service on Ferris and Scag. Still got to jack them up, put them on wheel stands, take the back wheels off, then get to the filters to drain.
Bleeding them afterwards is a PIA but not to bad.
Reply Quote
John Cocktolstoy
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:45a, 9/29/25
I see the parking brake is on!
Second Hardest Workin Man on Texags
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to chaca5151 • 1:42p, 9/29/25
chaca5151 said:
Unfortunately, changing the hydraulic fluid didn't work. Waiting on a new carb and coils. See if that will work.


Yes sir. Changed both fluid and filters.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
Tarponfly
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:35p, 9/29/25
AG
I have a place in the hill country and it is a freaking rock garden. Other than singing up the blades, do any of you run one of these things where rocks are a part of your every day reality? Any serious pitfalls? Most are small and I am not talking about hitting boulders
Reply Quote
chaca5151
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Tarponfly • 5:33p, 9/29/25
Tarponfly said:
I have a place in the hill country and it is a freaking rock garden. Other than singing up the blades, do any of you run one of these things where rocks are a part of your every day reality? Any serious pitfalls? Most are small, and I am not talking about hitting boulders


I live in the hill country of San Marcos on 10 acres, and there are definitely areas where the weedeater is the only option. The best method I've found is to clear a 20x20-foot section with a weed eater. After that, I come back to pick up the small and medium-sized rocks. This way, I ensure the area is safe for use with a mower. It certainly takes time, but it's the most effective approach I've discovered.
*** No one loves Mexico more than people who refuse to live there ***

Not everyone gets the same version of me. One person might tell you I have an amazing beautiful soul. Another might tell you I’m a cold-hearted a$$^ole. Believe them both. I don’t treat people badly. I treat them accordingly - unknown
Reply Quote
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.