I've seen several piece of ag equipment on here for a while so figured I'd ask. I'm looking for a used rock bucket. Cat QD style hookup preferred but anything would work as I can fabricate from there as needed.

Here is a picture of what I'm looking for.

If you don't mind driving to Trindad Texas, look at Providence Equipment, they have all sorts of equipment, assessories and implements. They get most to the items from dealers who want to move it off the lot on trade ins.

https://www.providence-equipment.com/default.htm

I saw a few of them when I was buy some equipment at Adams tractor in Cibolo a few weeks ago.

Adamstractorsales.com

I've got a 78" with dual grapples if you want to go crazy. $2200. Located in Conroe

Struggling to load a picture. Not sure why Imgur isn't working out for me anymore.

Thanks for the suggestions. I just about relegated myself to fabricating my own. But I'm going to explore these options first. I have a grapple already but not the bucket/dual style. That is a bit more than I want to spend and it probably wouldn't get utilized to capacity where I am now.

Jason_Roofer said:

---

Thanks for the suggestions. I just about relegated myself to fabricating my own. But I'm going to explore these options first. I have a grapple already but not the bucket/dual style. That is a bit more than I want to spend and it probably wouldn't get utilized to capacity where I am now.

---

You may be able to find something on marketplace or craigslist. Might have to extend the range.

I got rid of this the other day (got it for free picking up some scrap metal - been doing this to make extra $$), and sold it to someone for more than I would have gotten in scrap. Someone may have one sitting around.

Yeah, I thought about a rotted out bucket that I could modify. That would probably work fine for my purposes. I'll poke around on Facebook and see what's there. Otherqise looks like they are about 2k a pop. I can fabricate for 400 so I might have to suck it up and get to building.

Who makes that bucket? Also, what thickness of steel is used on the tines and what is their spacing?

I believe it's made by All-Star with 3/8" but I would have to go to confirm that.

Ends are 3/8. Tines are 1/4. 3-3/4" spacing

if you can wait a month, Ritchie brothers is having an auction in Houston. Usually, you can get one for less than $600-700